| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hours Online |
| Warranty: | 3-5 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Thermal conductivity measurement | Measurement range: 0.01~1.50W/(m · K) |
| Measurement error: ± 3% | |
| Measurement repeatability:±1% | |
| Temperature measurement | Measurement range: 10~90 ºC |
| Measurement accuracy: 0.1 ºC | |
| Environmental condition | Room temperature: 20-25ºC, it is recommended to use the standard temperature of 23 ºC |
| Humidity: 20~80% RH, it is recommended to use 40~60% RH | |
| Power supply voltage: AC220V±10%, 5kw. | |
| Test piece requirements | Standard thickness: 25mm, range 15~30mm |
| Standard size: 300mmx300mm | |
| Flatness: better than 0.1% | |
| Hardness: Various hard materials are acceptable. For soft materials, not to press them too tightly to avoid measurement errors caused by thickness changes. | |
| Measurement conditions | Cold plate temperature: When not using refrigeration equipment, the minimum temperature of the cold plate should be at least 10 ºC higher than the ambient temperature. When using refrigeration equipment, the minimum temperature of the cold plate can reach 10 ºC. The maximum temperature of the cold plate should be less than 70 ºC |
| Hot plate and protective plate temperature: The minimum temperature should be at least 10 ºC higher than the ambient temperature. The maximum temperature should be less than 90 ºC | |
| Temperature difference between hot and cold plates: It is recommended to use 20 ºC, and users can also set it themselves |
){kind=link}